產品特點：

◆設計速度：80m/min

◆有效幅寬：1400mm-2200mm

◆楞輥：Φ280mm

◆驅動減速箱采用浸油潤滑，減小噪音，萬向節傳動，隔離動力源。

◆上瓦輥、壓力輥、涂膠輥升降，均以氣動控制。

◆導紙方式采用真空吸附，帶風量調節裝置，保持高速狀態下瓦楞楞型的穩定。

◆瓦楞、壓力輥軸承采用耐高溫滑脂潤滑。

◆涂膠部采用自動循環供膠。

◆上下瓦楞輥采用48CrMo優質合金鋼，經過熱處理，硬度在HRC58°-60°表面經研磨。

◆涂膠輥表面經過網紋刻花及鍍鉻處理。

◆手動或電動隔膠裝置。

◆涂膠部停機可獨立運轉或不獨立運轉兩種方式,主電機變頻控制(選裝）。

Product features: 

◆Design speed: 80m/min 

◆Effective width: 1400mm-2200mm 

◆Corrugated roller: Φ280mm 

◆Driving reduction box adopts oil-immersion lubrication to reduce noise, universal joint transmission, and isolate power source.

◆The lifting and lowering of the upper tile roller, pressure roller and rubber coating roller are all pneumatically controlled.

◆The paper guiding method adopts vacuum adsorption and air volume adjustment device to maintain the stability of the corrugated shape at high speed.

◆The corrugated and pressure roller bearings are lubricated with high temperature resistant grease.

◆Gluing department adopts automatic recycling glue supply.

◆The upper and lower corrugated rollers are made of 48CrMo high-quality alloy steel, after heat treatment, the hardness of the surface is ground at HRC58°-60°.

◆The surface of the rubber roller is treated with anilox engraving and chrome plating.

◆Manual or electric glue isolating device.

◆The gluing part can be operated independently or not independently when stopped, and the main motor is controlled by frequency conversion (optional).