◆SF320S設計速度：100m/min

◆有效幅寬：1400mm-2200mm

◆楞輥：Φ320mm/360mm

◆驅動減速箱采用浸油潤滑，減小噪音，萬向節傳動,隔離動力源(選裝)。

◆上瓦輥、壓力輥、涂膠輥升降，均以氣動控制。

◆導紙方式采用真空吸附,帶風量調節裝置,保持高速狀態小瓦楞楞型的穩定。

◆瓦輥、壓力輥軸承采用耐高溫潤滑脂潤滑。

◆涂膠部采用自動循環供膠。

◆上下瓦楞輥采用48CrMo優質合金鋼,經過熱處理,硬度在HRC58° -60°表面經研磨。

◆涂膠輥表面經過網紋刻花及鍍鉻處理。

◆手動或電動隔膠裝置。

◆涂膠部停機可獨立運轉或不獨立運轉兩種方式。

◆SF320S design speed: 100m/min 

◆Effective width: 1400mm-2200mm 

◆Corrugated roller: Φ320mm/360mm 

◆Driving gearbox adopts immersion lubrication to reduce noise, universal joint drive, isolated power source (optional).

◆The lifting and lowering of the upper tile roller, pressure roller and rubber coating roller are all pneumatically controlled.

◆The paper guide method adopts vacuum adsorption and air volume adjustment device to maintain the stability of the small corrugated type at high speed.

◆The bearings of the tile roller and pressure roller are lubricated with high temperature resistant grease.

◆Gluing department adopts automatic recycling glue supply.

◆The upper and lower corrugated rollers are made of 48CrMo high-quality alloy steel, after heat treatment, the hardness is HRC58°-60° and the surface is ground.

◆The surface of the rubber roller is treated with anilox engraving and chrome plating.

◆Manual or electric glue isolating device.

◆The gluing section can operate independently or not in two ways when it stops.