◆設計速度250m/min,上漿輥直徑320mm。

◆每層糊輪的轉動均由變頻電機單獨控制,由變頻器控制即保證每層糊輪線速的同步,又可以單獨運轉。

◆因每層糊輪的轉動由變頻電機單獨控制,故此在上漿輥翻新后仍可以由變頻器調控每層糊輪同線速。

◆上糊量和控糊量的控制可分手動和自動兩種:

◆手動時根據速度去點動電機達到所需的控糊量;

◆自動時根據速度的變化由編碼器和PLC自動控制完成并有人機界面顯示數值，確保瓦楞機在高、低速運轉時所需要的上糊量保證見坑紙質量的穩定性。

◆停機時，觸壓輪自動抬起，漿輥(糊轆)將自動空轉。

◆可選擇壓輥加壓或彈性觸壓棒加壓方式。

◆The design speed is 250m/min, and the diameter of the sizing roller is 320mm.

◆The rotation of each layer of paste wheels is individually controlled by a frequency conversion motor, which is controlled by a frequency converter to ensure the synchronization of the line speed of each layer of paste wheels, and can operate independently.

◆Because the rotation of each layer of gluing wheel is individually controlled by the frequency conversion motor, after the sizing roller is refurbished, the frequency converter can still control the same line speed of each layer of gluing wheel.

◆The control of the amount of paste and the amount of paste control can be divided into manual and automatic;

◆In manual mode, the motor is moved according to the speed to achieve the required amount of paste control; 

◆In the case of automatic, the encoder and PLC are automatically controlled according to the speed change. And the man-machine interface displays the value to ensure the amount of paste required by the corrugator at high and low speeds to ensure the stability of the paper quality.

◆When the machine is stopped, the touch roller will automatically lift up, and the paddle roller (gluing roller) will automatically run idly.

◆Press roller pressure or elastic touch bar pressure can be selected.